Catalogue specification image of the JY-98FL 98 mm PET flat lid
The catalogue product image was restored with AI to help identify the model. The JY-98FL catalogue identifies a 98 mm PET flat lid. Its diameter and photograph help identify a candidate; they do not demonstrate fit with a particular cup.

Separate a catalogue candidate from a verified combination

WJPETCUP groups PET cups and lids by diameter so that buyers can narrow the catalogue. This is a useful first filter. The next question is more specific: which lid model is intended for the exact cup model being ordered, and what supports that statement?

The public entries below identify a possible pair for discussion. They contain different information about two separate components. Neither the shared number nor their appearance together in this article is a compatibility declaration.

Two catalogue references to identify a candidate pair
ComponentExact modelPublished identifying informationWhat remains unproven
PET cupJY9806-500-16ozDiameter 98 mm; height 127 mm; bottom diameter 62.5 mmCompatibility with the proposed lid
PET flat lidJY-98FLDiameter 98 mm; weight 2.8 gCompatibility with the proposed cup and intended use

Look at the meeting surfaces, not just the headline number

A single catalogue diameter does not describe the whole connection. When discussing fit, ask what surface the stated dimension refers to and request the relevant cup-rim and lid seating information. A dimensioned drawing, where available, is more informative than assuming every visible edge represents the same measurement.

Identify the cup lip and the part of the lid intended to engage it. Ask which rim or closure details distinguish nearby models, and whether the supplier has specified limits for the relevant dimensions. Do not invent those limits from a photograph or infer a matching profile from the two product names.

The practical outcome of this step is a precise candidate combination and a list of any missing interface information. It is not a new compatibility table generated by matching every cup and lid with the same diameter.

Decide what the combination must do for your operation

Fit has to be considered in the context of the intended operation. A review that only considers the appearance of a lid on an empty cup leaves other questions unanswered. State the drink, expected filling and serving conditions, intended fill level, toppings if relevant, and how the closed cup will be handled.

Keep these requirements separate from the lid style decision. Choosing a flat, dome or sip-style lid determines the type of opening and overall structure you want to assess. It does not establish compatibility or demonstrate performance. The lid-style guide can help narrow those choices before this verification step.

Turn the operating requirement into a question for the review
Requirement to describeQuestion for this exact combination
How the lid is appliedCan the intended operator or process close the identified samples as required?
Drink and intended fill levelWhat contents and level will be used when assessing the combination?
Serving and handlingWhich actual handling steps must the buyer assess before approving use?
Acceptance requirementWhat observations or agreed criteria will distinguish acceptable, unacceptable and unresolved results?

Review the actual parts and preserve the scope

Obtain samples of the exact models under discussion and retain their labels or identifying references. If a sample is substituted, record the substitution and its effect on the review. Do not let a supplier's generic '98 mm lid sample' become the evidence for an order naming a different lid.

Agree the review method and acceptance criteria with the relevant supplier and buyer personnel. Record what was done and what was observed under the stated conditions. This article does not set a leak-test duration, force requirement, tolerance or laboratory procedure; those require an appropriate basis for the application.

Photographs can support identification and show an observation. They should not replace the written conditions or turn a single view of an assembled cup into a broad claim of leak resistance.

Two examples of evidence that is still incomplete

Consider a hypothetical note: 'The lid closes on the cup.' If it contains no model numbers, sample references or conditions, the note cannot reliably be attached to a specific purchase. Improve it by identifying the parts and recording the scope of the observation; do not simply change the wording to 'compatible'.

Now consider another hypothetical note that identifies JY9806-500-16oz and candidate JY-98FL but describes only an empty-cup closure check. That may document one observation, but it does not answer the buyer's separate questions about the planned drink and handling. Keep those questions unresolved until the required evidence is available. Neither example reports an actual WJPETCUP test.

Do not transfer a decision to a different pair

An approval should remain attached to the combination and conditions actually assessed. Changing the cup, lid, version or intended use calls for a review of which evidence remains applicable. The same diameter or nominal capacity is not a reason to silently replace one component.

Ask for the supplier's current model pairing information and connect it with your own sample assessment. Where the evidence is incomplete, state exactly what is missing. This gives the next enquiry a useful purpose: resolving a defined combination, rather than collecting another unlabelled sample.

Read more

Identify the cup and lid you want to assess

Send both exact model references, the intended drink and handling conditions, and any sample evidence already available. Ask which candidate combination and remaining checks apply to your requirement.

Back to sourcing guide